$650 USD per company per year
Easy Campaign Member Status from Full Circle Insights enables you to define standard or custom member status values by campaign type or custom campaign picklist field. Set up your default values and never have to worry about them again!
TERMS AND CONDITIONS
DELIVERY OF FULL CIRCLE INSIGHTS PRODUCTS AND SERVICES
1.1. Access to Products. Full Circle Insights shall make available to Customer the Full Circle Insights Products specified in the applicable Order Form for the Subscription Term. The applicable Order Form defines specific Usage Rights, and Customer shall at all times ensure that its use does not exceed its Usage Rights. Customer may permit its independent contractors and consultants who are not competitors of Full Circle Insights (“Contractors”) to access the Full Circle Insights Products, provided Customer remains responsible for compliance by each such Contractor with all of the terms and conditions of this Agreement and any such use of Full Circle Insights Products by such Contractor is for the sole benefit of Customer.
1.2. Support. During the Subscription Term of each Full Circle Insights Product, Full Circle Insights shall provide support and maintenance (“Support”) for such Full Circle Insights Product in accordance with the terms set forth on the applicable Order Form.
1.3. Remote Hosting. Customer acknowledges and agrees that the Full Circle Insights Products operate on or with specific editions from salesforce.com, and Full Circle Insights shall not be responsible for the operation of such service, nor the availability or operation of the Full Circle Insights Products to the extent such availability and operation is dependent upon the availability and operation of such service. Customer shall be solely responsible for procuring any rights necessary for Customer to access such service and for complying with any applicable terms or conditions. Full Circle Insights does not make any representations or warranties with respect to any third-party providers or any of their products or services. Any exchange of data or other interaction between Customer and a third-party provider, and any purchase by Customer of any product or service offered by such third-party provider, is solely between Customer and such third-party provider.
2.1. Grant of License. Subject to the terms and conditions of this Agreement, Full Circle Insights hereby grants to Customer a non-exclusive, non-sublicenseable, non-transferable, limited right to access and use the Full Circle Insights Products specified in the applicable Order Form, only in accordance with (a) any technical specification documentation generally made available by Full Circle Insights with regard to such Full Circle Insights Product (“Documentation”), (b) the applicable Subscription Term and (c) any User or other field of use restrictions set forth in the applicable Order Form. “Full Circle Insights Products” shall also include any Documentation and any Support releases of the same Full Circle Insights Product made available to Customer under this Agreement.
2.2. License Restrictions. Customer shall not: (a) rent, lease, copy, provide access to or sub-license Full Circle Insights Products to a third party, (b) reverse engineer, decompile, disassemble, or otherwise seek to obtain the source code or any non-public APIs to Full Circle Insights Products (c) modify any Full Circle Insights Product (provided that, for the avoidance of doubt, configuration or customization of the Full Circle Insights Product using the tools provided in the Full Circle Insights Product shall not be considered a prohibited modification), or create any derivative product from any of the foregoing, (d) circumvent or disable any security or other technological features or measures of the Full Circle Insights Product, (e) remove or obscure any product identification, proprietary, copyright or other notices contained in Full Circle Insights Products (including on any reports or data generated by the Full Circle Insights Products), (f) incorporate the Full Circle Insights Products into any other offering (whether software-as-a-service or otherwise), (g) use the Full Circle Insights Products in any unlawful manner or in any other manner that interferes with, disrupts, or disables the Full Circle Insights Products or the networks or services on which the Full Circle Insights Products operate, or (h) publicly disseminate information or analysis regarding the performance of Full Circle Insights Products. For clarity, Full Circle Insights reserves the right to suspend or terminate any User’s or Customer’s use of the Full Circle Insights Products for violation of any of the foregoing restrictions, as determined by Full Circle Insights in its sole discretion.
3.1. Generally. “Customer Data” means any business information or other data of any type that is provided by Customer to Full Circle Insights in connection with Full Circle Insights providing Full Circle Insights Offerings. Customer shall ensure that Customer’s use of Full Circle Insights Products and all Customer Data is at all times compliant with all applicable local, state, federal and international law, regulations and conventions, including, without limitation, those related to data privacy, international communications, and the exportation of technical or personal data and complies with Customer’s privacy policies. Customer is solely responsible for the accuracy, content and legality of all Customer Data.
3.2. Rights in Customer Data. As between the parties, Customer shall retain all right, title and interest (including any and all intellectual property rights) in and to the Customer Data as provided to Full Circle Insights. Subject to the terms of this Agreement, Customer hereby grants to Full Circle Insights a non-exclusive, worldwide, royalty-free right to use, copy store, transmit and display the Customer Data, but only to the extent necessary to provide Full Circle Insights Offerings.
4.1. Ownership. This is a subscription agreement for use of Full Circle Insights Products and not an agreement for sale. Customer acknowledges that it is obtaining only a limited right to access and use the Full Circle Insights Products and that no ownership rights are being conveyed to Customer under this Agreement or otherwise. Full Circle Insights or its suppliers retain all right, title and interest (including all patent, copyright, trade secret and other intellectual property rights) in and to the Full Circle Insights Offerings and any and all related and underlying software (including interfaces), databases (including data models and structures) and underlying technology. Further, Customer acknowledges that the Full Circle Insights Products are offered as an on-line, hosted solution, and that Customer has no right to obtain a copy of the Full Circle Insights Product itself.
4.2. Feedback. Customer may submit comments, questions, ideas or other information to Full Circle Insights related to Full Circle Insights Offerings (“Feedback”). Full Circle Insights may in connection with any of its products or services freely use, copy, disclose, license, distribute and exploit any Feedback in any manner without any obligation, royalty or restriction.
SUBSCRIPTION TERM, FEES & PAYMENT
5.1. Subscription Term and Renewals. The term of any Subscription shall commence on the Effective Date of the applicable Order Form. Except as otherwise specified in an Order Form, subscriptions will automatically renew for additional periods equal to the expiring subscription term or one year (whichever is shorter), unless either party gives the other notice of non-renewal at least 45 days before the end of the relevant subscription term.
5.2. Subscription Fees. Customer shall pay all fees for each Subscription as specified in the applicable Order Form. Except as otherwise specified in this Agreement or in an applicable Order Form:(a) fees are based on Full Circle Insights Products and services purchased, not actual usage, (b) payment obligations are non-cancelable, (c) fees paid are non-refundable and (d) the Subscription purchased cannot be decreased during the relevant Subscription Term. Because fees are based on monthly units, fees for Subscriptions purchased in the middle of a monthly period will be charged for that monthly period in full and going forward based on the number of monthly periods remaining in the Subscription Term.
5.3. Payment Terms. All payments shall be made in U.S. dollars within thirty (30) days of receipt of invoice, unless otherwise specified in the applicable Order Form. Customer shall be responsible for all sales, use, GST, value-added withholding or similar taxes or levies, whether domestic or foreign, except taxes based on the net income of Full Circle Insights. Any late payments shall be subject to a service charge equal to 1.5% per month of the amount due.
5.4. Usage Rights. If at any time Full Circle Insights determines that Customer is exceeding the Usage Rights, Full Circle Insights shall notify Customer and Customer shall bring its usage within the limits of such Usage Rights. If Customer fails to do so within 30 days of receipt of Full Circle Insights’ notice, Full Circle Insights reserves the right to charge and Customer agrees to pay Full Circle Insights’ then-current usage fees for such overage.
5.5. Suspension of Service; Reconnection Fees. If Customer’s account is thirty (30) days or more overdue, in addition to any of its other rights or remedies, Full Circle Insights reserves the right to suspend Customer’s access to the Full Circle Insights Products without liability to Customer, until such amounts are paid in full. In addition, Full Circle Insights reserves the right to impose a reconnection fee to restore Customer’s access after all amounts have been paid in full. Full Circle Insights will notify the customer contacts on the applicable Order Form by email 30 days prior to suspension of access to Full Circle Insights Products.
TERM AND TERMINATION
6.1. Term. This Agreement is effective as of the Effective Date and unless terminated earlier in accordance with this Agreement shall terminate upon the expiration or termination of all Subscription Terms.
6.2. Termination for Cause. Either party may terminate this Agreement (including all related Order Forms) if the other party (a) fails to cure any material breach of this Agreement within thirty (30) days after written notice; (b) ceases operation without a successor; or (c) seeks protection under any bankruptcy, receivership, trust deed, creditors’ arrangement, composition, or comparable proceeding, or if any such proceeding is instituted against that party.
6.3. Effect of Termination. Upon any termination of this Agreement, Customer shall immediately cease any and all use of and access to Full Circle Insights Products and delete (or, at Full Circle Insights’ request, return) any and all copies of any related Documentation, any Full Circle Insights passwords or access codes and any other Full Circle Insights Confidential Information (as defined below) in its possession. Customer acknowledges that following termination Customer shall have no further access to any Customer Data through the Full Circle Insights Products, and that Full Circle Insights will delete any such data in its possession at any time after termination. Termination of this Agreement is not an exclusive remedy and the exercise of either party of any remedy under this Agreement will be without prejudice to any other remedies it may have under this Agreement, by law, or otherwise. Full Circle Insights shall have no liability from any termination of any Full Circle Insights Product or termination of this Agreement in accordance with the terms of this Agreement.
6.4. Survival. The following Sections shall survive any expiration or termination of this Agreement: 2.2 (General Restrictions), 3 (Customer Data), 4 (Ownership), 5.2 (Subscription Fees), 5.3 (Payment Terms), 6 (Term and Termination), 7.2 (Warranty Disclaimer), 9 (Limitation of Remedies and Damages), 10 (Indemnification), 11 (Confidential Information), and 12 (General Terms).
7.1. Limited Warranty. Full Circle Insights warrants, for Customer’s benefit only, that Full Circle Insights Products will operate in substantial conformity with the applicable Documentation. Full Circle Insights does not warrant that Customer’s use of the Full Circle Insights Products will be uninterrupted or error-free or that it will preserve or maintain any Customer Data without loss. Full Circle Insights’ sole liability (and Customer’s sole and exclusive remedy) for any breach of this warranty shall be, in Full Circle Insights’ sole discretion and at no charge to Customer, to use commercially reasonable efforts to provide Customer with an error correction or work-around that corrects the reported non-conformity, or if Full Circle Insights determines such remedies to be impracticable, to allow Customer to terminate the Subscription Term and receive as its sole remedy a refund of: (a) the pro-rated amount of the applicable monthly Subscription fee allocable to the number of days the Full Circle Insights Product was not in conformance with the warranty and (b) any fees pre-paid by Customer for any remaining portion of the terminated Subscription Term. The limited warranty set forth in this Section shall not apply: (i) unless Customer makes a claim within thirty (30) days of the date on which the condition giving rise to the claim first appeared, (ii) if the error was caused by misuse, unauthorized modifications or third-party hardware, software or services or (iii) to use provided on a no-charge or evaluation basis.
7.2. Warranty Disclaimer. EXCEPT FOR THE LIMITED WARRANTY IN SECTION 7.1, FULL CIRCLE INSIGHTS PRODUCTS, SUPPORT, PROFESSIONAL SERVICES OR OTHER OFFERINGS ARE PROVIDED “AS IS” AND WITH ALL FAULTS. FULL CIRCLE INSIGHTS AND ITS SUPPLIERS SPECIFICALLY DISCLAIM ANY AND ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, TITLE AND FITNESS FOR A PARTICULAR PURPOSE. TO THE FULL EXTENT PERMITTED BY LAW, THE DURATION OF STATUTORILY REQUIRED WARRANTIES, IF ANY, SHALL BE LIMITED TO THE MINIMUM PERIOD REQUIRED BY LAW.
FULL CIRCLE INSIGHTS SHALL NOT BE LIABLE FOR DELAYS, INTERRUPTIONS, SERVICE FAILURES AND OTHER PROBLEMS INHERENT IN USE OF THE INTERNET AND ELECTRONIC COMMUNICATIONS OR OTHER SYSTEMS OUTSIDE THE REASONABLE CONTROL OF FULL CIRCLE INSIGHTS.
FULL CIRCLE INSIGHTS EXERCISES NO CONTROL OVER AND EXPRESSLY DISCLAIMS ANY LIABILITY ARISING OUT OF OR BASED UPON CUSTOMER’S USE OF THIRD PARTY SERVICES.
FULL CIRCLE INSIGHTS SHALL NOT BE LIABLE FOR FUNCTIONALITY ADDED TO THE APPLICATION USING THE
FULL CIRCLE INSIGHTS RESPONSE MANAGEMENT APPLICATION EXTENSIBILITY API, OR FOR ANY ERRORS IN THE APPLICATION CAUSED BY SAID FUNCTIONALITY, UNLESS SAID FUNCTIONALITY IS BUILT AND IMPLEMENTED BY FULL CIRCLE INSIGHTS.
8.1. Service Delivery. Full Circle Insights shall provide the professional consulting services (“Professional Services”) (if any) purchased as set forth in the applicable Order Form. The parties acknowledge that the scope of the Professional Services consists solely of either: (a) assistance with Full Circle Insights Product deployment and usage; or (b) development or delivery of additional related Full Circle Insights copyrighted software or code. Customer shall have a license right to use anything delivered as part of the Professional Services subject to the terms of its license to use the Full Circle Insights Products, but Full Circle Insights shall retain all right, title and interest in and to any such work product, code or deliverable and any derivative, enhancement or modification thereof. The scope of Professional Services shall be as set forth in a Statement of Work (“SOW”) executed by both parties or as set forth in the applicable Order Form describing the work to be performed, fees, dependencies and other technical specifications or related information. Customer shall pay Full Circle Insights at the rates set forth in Exhibit A (or, if not specified, at Full Circle Insights’ then-standard rates). Customer will reimburse Full Circle Insights for reasonable travel and lodging expenses as pre-approved and incurred.
8.2. Extensibility Model. All support services relating to use of the Full Circle Insights Response Management Application extensibility model or Campaign Attribution Software Development Kit will be billed at the Full Circle Insights Professional Services rate for APEX development. Any support cases where the issue is determined to result from use of the Full Circle Insights Response Management Application extensibility model will also be billed at the Full Circle Insights Professional Services rate for APEX development.
LIMITATION OF REMEDIES AND DAMAGES
9.1. NEITHER PARTY SHALL BE LIABLE FOR ANY LOSS OF USE, LOST OR INACCURATE DATA, FAILURE OF SECURITY MECHANISMS, INTERRUPTION OF BUSINESS, COSTS OF DELAY OR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL, RELIANCE OR CONSEQUENTIAL DAMAGES OF ANY KIND (INCLUDING LOST PROFITS), REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR OTHERWISE, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.
9.2. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, A PARTY’S ENTIRE LIABILITY RELATING TO THIS AGREEMENT SHALL NOT EXCEED THE AMOUNT ACTUALLY PAID (IN THE CASE OF FULL CIRCLE INSIGHTS’ LIABILITY TO CUSTOMER) OR PAYABLE (IN THE CASE OF CUSTOMER’S LIABILITY TO FULL CIRCLE INSIGHTS) BY CUSTOMER TO FULL CIRCLE INSIGHTS DURING THE PRIOR TWELVE (12) MONTHS UNDER THIS AGREEMENT. THIS PARAGRAPH SHALL NOT APPLY WITH RESPECT TO ANY CLAIM ARISING UNDER SECTIONS 2.1 (GRANT OF LICENSE), 2.2 (LICENSE RESTRICTIONS), 10 (INDEMNIFICATION) OR 11 (CONFIDENTIAL INFORMATION).
9.3. The parties agree that the limitations specified in this Section 9 will survive and apply even if any limited remedy specified in this Agreement is found to have failed of its essential purpose.
10.1. Indemnification Obligations of Full Circle Insights. Full Circle Insights shall indemnify, defend and hold harmless Customer from and against any and all claims, costs, damages, losses, liabilities and expenses (including reasonable attorneys’ fees and costs) arising out of or in connection with any claim of infringement of a U.S. patent, copyright, or trademark asserted against Customer by a third party based upon Customer’s authorized use of Full Circle Insights Products in accordance with the terms of this Agreement. If Customer’s use of any Full Circle Insights Product is, or in Full Circle Insights’ opinion is likely to be, enjoined due to the type of infringement specified above, or if required by settlement, Full Circle Insights may, in its sole discretion: (a) substitute substantially functionally similar products or services; (b) procure for Customer the right to continue using Full Circle Insights Products; or if (a) and (b) are commercially impracticable; (c) terminate the Agreement and refund to Customer the fees paid by Customer for the portion of the Subscription Term which was paid by Customer but not delivered by Full Circle Insights. The foregoing indemnification obligation of Full Circle Insights shall not apply: (1) if a Full Circle Insights Product is modified by any party other than Full Circle Insights, but solely to the extent the alleged infringement is caused by such modification; (2) to the extent such claim arises from any element of any third party product or service or the combination of the Full Circle Insights Product with any other third-party product or service; (3) to any unauthorized use of Full Circle Insights Products; or (4) any action arising as a result of Customer Data or any third-party deliverables or components contained within Full Circle Insights Products. THIS SECTION 10.1 SETS FORTH FULL CIRCLE INSIGHTS’ SOLE LIABILITY AND CUSTOMER’S SOLE AND EXCLUSIVE REMEDY WITH RESPECT TO ANY CLAIM OF INTELLECTUAL PROPERTY INFRINGEMENT.
10.2. Indemnification by Customer. Customer shall indemnify, defend and hold harmless Full Circle Insights from and against any and all claims, costs, damages, losses, liabilities and expenses (including reasonable attorneys’ fees and costs) arising out of or in connection with any claim arising from Customer Data (including, but not limited to, any claim of intellectual property infringement) or Customer’s use of Full Circle Insights Products in violation of this Agreement.
10.3. Indemnification Procedures. A party’s indemnification obligations hereunder are subject to the indemnifying party having received from the indemnified party: (i) prompt written notice of the claim for which the indemnified party is seeking indemnity hereunder (but in any event notice in sufficient time for the indemnifying party to respond without prejudice); (ii) the exclusive right to control and direct the investigation, defense, or settlement of such claim; and (iii) all reasonable necessary cooperation of the indemnified party.
CONFIDENTIAL INFORMATION. Each party agrees that all code, inventions, know-how, business, technical and financial information and Customer Data it obtains (“Receiving Party”) from the disclosing party (“Disclosing Party”) constitute the confidential property of the Disclosing Party (“Confidential Information”), provided that it is identified as confidential at the time of disclosure or should be reasonably known by the Receiving Party to be Confidential Information due to the nature of the information disclosed and the circumstances surrounding the disclosure. Any Full Circle Insights Products shall be deemed Confidential Information of Full Circle Insights without any marking or further designation. The terms of this Agreement shall be deemed the Confidential Information of both parties. Except as expressly authorized herein, the Receiving Party will hold in confidence and not use or disclose any Confidential Information. The Receiving Party’s nondisclosure obligation shall not apply to information which the Receiving Party can document: (i) was rightfully in its possession or known to it prior to receipt of the Confidential Information; (ii) is or has become public knowledge through no fault of the Receiving Party; (iii) is rightfully obtained by the Receiving Party from a third party without breach of any confidentiality obligation; (iv) is independently developed by employees of the Receiving Party who had no access to such information; or (v) is required to be disclosed pursuant to a regulation, law or court order (but only to the minimum extent required to comply with such regulation or order and with advance notice to the Disclosing Party). The Receiving Party acknowledges that disclosure of Confidential Information would may substantial harm for which damages alone would not be a sufficient remedy, and therefore that upon any such disclosure by the Receiving Party the Disclosing Party shall be entitled to seek appropriate equitable relief in addition to whatever other remedies it might have at law.
12.1. Assignment. This Agreement will bind and inure to the benefit of each party’s permitted successors and assigns. Neither party may assign this Agreement except upon the advance written consent of the other party, except that either party may assign this Agreement in connection with a merger, reorganization, acquisition or other transfer all or a portion of such party’s assets or voting securities. Any attempt to transfer or assign this Agreement except as expressly authorized under this Section 12.1 will be null and void.
12.2. Severability. If any provision of this Agreement shall be adjudged by any court of competent jurisdiction to be unenforceable or invalid, that provision shall be limited to the minimum extent necessary so that this Agreement shall otherwise remain in effect.
12.3. Governing Law; Jurisdiction and Venue. This Agreement shall be governed by the laws of the State of California without regard to its conflicts of laws provisions, and without regard to the United Nations Convention on the International Sale of Goods. Unless waived by Full Circle Insights in its sole discretion, the jurisdiction and venue for actions related to the subject matter hereof shall be the state and United States federal courts located in San Mateo County, California and both parties hereby submit to the personal jurisdiction of such courts.
12.4. Attorneys’ Fees and Costs. The prevailing party in any action to enforce this Agreement will be entitled to recover its attorneys’ fees and costs in connection with such action.
12.5. Notice. Any notice or communication required or permitted under this Agreement shall be in writing to the parties at the addresses set forth on the Order Form or at such other address as may be given in writing by either party to the other in accordance with this Section and shall be deemed to have been received by the addressee if given by overnight courier service, or by registered or certified mail, postage prepaid and return receipt requested, the second business day after such notice is deposited in the mail.
12.6. Amendments; Waivers. No supplement, modification, or amendment of this Agreement shall be binding, unless executed in writing by a duly authorized representative of each party to this Agreement. No waiver will be implied from conduct or failure to enforce or exercise rights under this Agreement, nor will any waiver be effective unless in a writing signed by a duly authorized representative on behalf of the party claimed to have waived. No provision of any purchase order or other business form employed by Customer will supersede the terms and conditions of this Agreement, and any such document relating to this Agreement shall be for administrative purposes only and shall have no legal effect.
12.7. Entire Agreement. This Agreement is the complete and exclusive statement of the mutual understanding of the parties and supersedes and cancels all previous written and oral agreements and communications relating to the subject matter of this Agreement. Customer acknowledges that Full Circle Insights Products are on-line, subscription-based products, and that in order to provide improved customer experience Full Circle Insights may make changes to Full Circle Insights Products.
12.8. Force Majeure. Neither party shall be liable to the other for any delay or failure to perform any obligation under this Agreement (except for a failure to pay fees) if the delay or failure is due to unforeseen events which occur after the signing of this Agreement and which are beyond the reasonable control of such party, such as a strike, blockade, war, act of terrorism, riot, natural disaster, failure or diminishment of power or telecommunications or data networks or services, or refusal of a license by a government agency.
12.9. Subcontractors. Full Circle Insights may use the services of subcontractors for performance of services under this Agreement, provided that Full Circle Insights remains responsible for (i) compliance of any such subcontractor with the terms of this Agreement and (ii) for the overall performance of Full Circle Insights Products as required under this Agreement.
12.10. Independent Contractors. The parties to this Agreement are independent contractors. There is no relationship of partnership, joint venture, employment, franchise or agency created hereby between the parties. Neither party will have the power to bind the other or incur obligations on the other party’s behalf without the other party’s prior written consent.
12.11. Government End-Users. The Full Circle Insights Products are commercial computer software. If the user or licensee of the Full Circle Insights Products is an agency, department, or other entity of the United States Government, the use, duplication, reproduction, release, modification, disclosure, or transfer of the Full Circle Insights Products, or any related documentation of any kind, including technical data and manuals, is restricted by a license agreement or by the terms of this Agreement in accordance with Federal Acquisition Regulation
12.12. For civilian purposes and Defense Federal Acquisition Regulation Supplement 227.7202 for military purposes. The Full Circle Insights Products were developed fully at private expense. All other use is prohibited.